Stormwater home page City of Los Angeles home page
      Department of Public Works Bureau of Sanitation
Bulldozer, Backhoe & Garden Machine Operators, Developers, Dump Truck Drivers, General Contractors, Home Builders, and Site Supervisors
Soil excavation and grading operations often contribute to urban runoff pollution. By loosening large amounts of soil and sediment, earthmoving activities can cause sediment to flow into gutters, storm drains and the ocean.

Sediment is the most common pollutant washed from work sites, creating multiple problems once it enters the ocean. Sediment clogs the gills of fish, blocks light transmission and increases ocean water temperature, all of which harm sea life, disturbing the food chain upon which both fish and people depend.

Sediment also carries with it other work-site pollutants such as pesticides, cleaning solvents, cement wash, asphalt and car fluids like motor oil, grease and fuel. Thus, poorly maintained vehicles and heavy equipment leaking fuel and oil at the construction site also contribute to ocean pollution.

General Business Practices

  • Schedule excavation and grading work for dry weather.
  • Use as little water as possible for dust control.

Vehicle & Equipment Maintenance

  • Maintain all vehicles and heavy equipment. Inspect frequently for leaks.
  • Conduct all vehicle/equipment maintenance and refueling at one location—away from storm drains.
  • Perform major maintenance, repair jobs and vehicle/equipment washing off-site.
  • Use gravel approaches where truck traffic is frequent to reduce soil compaction and limit the tracking of sediment into streets.
  • Use drip pans or drop cloths to catch drips and spills, if you drain and replace motor oil, radiator coolant or other fluids on-site.
    Collect all used fluids, store in separate containers and recycle whenever possible.
  • Do not use diesel oil to lubricate equipment or parts

Cleaning Up

  • Sweep up dry spilled materials immediately. Never attempt to bury them or "wash them away" with water.
  • Clean up spills on dirt areas by digging up and properly disposing of contaminated soil.
  • Report significant spills to the appropriate spill response agencies immediately. Use the telephone numbers provided on the back of this pamphlet.
  • Clean up leaks, drips and other spills immediately. This will prevent contaminated soil or residue on paved surfaces.
  • Never hose down "dirty" pavement or surfaces where materials have spilled. Use dry cleanup methods whenever possible.

Employee and Client Education

  • Educate your employees. Include water quality training in new employee orientations and conduct annual review sessions.
  • Educate your customers. Raise employee and customer awareness by stenciling storm drains near the work place.

After clearing, grading or excavating, exposed soil poses a clear and immediate danger of stormwater pollution.

Re-vegetation (permanent or temporary) is an excellent form of erosion control for any site.

  • Avoid excavation and grading activities during wet weather.
  • Construct diversion dikes to channel runoff around the site. Line channels with grass or roughened pavement to reduce runoff velocity.
  • Cover stockpiles and excavated soil with secured tarps or plastic sheeting.
  • Remove existing vegetation only when absolutely necessary. Large projects should be conducted in phases.
  • Consider planting temporary vegetation for erosion control on slopes or where construction is not immediately planned.
  • Plant permanent vegetation as soon as possible, once excavation and grading activities are complete.
Other BMPs

Automotive Industry & Repair

Heavy Equipment Operators

Horse Owners & Equine Industry

Home Repair & Remodeling

Land or Air Transportation Facility

Landscape, Gardening & Pest Control

Manufacturing Facilities


Restaurant Industry

Septic Tank Systems

Sewage Systems

Water-based Cleaners

Back to top of page